Kingston 8GB 2666MHz DDR4 Non-ECC CL19 SODIMM 1Rx8 [KVR26S19S8/8]

Kingston KVR26S19S8/8 Description:

Overview

This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

Key Features:

• Power Supply: VDD - 1.2V Typical
• VDDQ - 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD - 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe and mask signals
• Low-power auto self refrech (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 Internal Banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mdoe register ser (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topoogy
• Terminated control command and address bus
• PCB: Height 1.1" (30.00mm)
• RoHS Compliant and Halogen-Free