To find the right Consumables for your Printer use the search below with your Printer Model or Cartridge Part # .
MyDigitalSSD Bullet Proof eXpress (BPX) 80mm (2280) M.2 PCIe 3.0 x4 NVMe SSDs are changing the conversation from MB/s to GB/s - unleashing sequential read/write speeds over 4X faster than SATA SSDs at a blistering 2.6GB (2,600MB/s) and 1.3GB/s (1,300MB/s) respectively. BPX drives empower gamers, enthusiasts, and professionals by opening a new realm of possibilities in the world of high-end computing while also an ideal solution for read-intensive enterprise servers and data center applications. Get the most out of your notebook / Ultrabook / NUC mini PC / All-In-One / desktop workstation; experience GB/s performance today with BPX.
NVMe (Non-Volatile Media Express) is an SSD storage interface that sheds the burden of legacy AHCI commands for uncompromised performance that saves power even throughout data-intensive workloads over a 5-year period.
With a lower latency than that of today's traditional hard disk drives and SATA SSDs, BPX drives create a more responsive computing experience.
MyDigitalSSD BPX drives use a four-lane PCI Express 3.0 (PCIe) interface to maximize your computing experience; delivering exceptional throughput performance and latency in this client solid state drive.
Built with scalability in mind, BPX drives are backwards compatible with PCIe 2.0 and 1.1; limited only by their respective bandwidths.
The PHISON E7 (PS5007-E7) controller is built to safeguard mission-critical data with end-to-end data path protection and a SmartECC engine to ensure data integrity during high-speed transfers. It also utilizes firmware algorithms such as SmartFlush and an optional P-fail circuitry to prevent in-flight data loss from sudden power interruptions, as well as advanced security features driven with a 256bit AES engine.
Additionally, the E7 controller supports NVMe L1 sub-state with less than 5mW in L1.2 low power mode, a key requirement for next-generation notebooks.
MyDigitalSSD BPX drives can be used as a boot device in a variety of systems with a free PCIe 2.0/3.0 M.2 socket, including Z97 / X99 / Z170 based motherboards, modern notebooks, and small form factor PC's like the Intel NUC.
They can also serve as added ultra-high-speed storage in virtually any desktop with a spare PCIe slot combined with a PCIe adapter.
SKU | MDNVME80-BPX-0256 |
Capacity | 240GB |
Form Factor | M.2 2280 (80mm) |
Interface | PCIe 3.0 x4 |
Protocol | NVMe 1.2 |
Flash | 2D MLC w/ 4-plane high-performance NAND |
Controller | Phison E7 (PS5007-E7) |
Encryption | AES 256-bit |
Max Sequential Read | 2.6GB/s / 2,600MB/s |
Max Sequential Write | 1.3GB/s / 1,300MB/s |
4K Random Read | 35MB/s (CDM) |
4K Random Write | 150MB/s (CDM) |
Dimensions | 80mm x 22mm x 3mm |
Weight | 8g |
Operation Temperature | 0 to 70°C |
Storage Temperature | -40 to 85°C |
Shock | 1500G/0.5ms |
Vibration | 80Hz~2000Hz/20G |
Operating Voltage | 3.3V |
Power Consumption | < 7 W |
DEVSLP Mode | L1.2 power state supported |
Error Correction Code | Supports ECC with 120bits/2KB BCH |
Endurance | Up to 1,400 TBW |
MTBF | >2,000,000 hours |
RAID Support | Yes |
TRIM Support | Yes |
SMART Support | Yes |
Static & Dynamic Wear Leveling | Yes |
Bad Block Management | Yes |
ETE Data Path Protection | Yes |
Low Power Management | Yes (HIPM/DIPM mode) |
Garbage Collection | Automatic |
Device Sleep Mode Support | Yes |
Software | None |
Compliance | RoHS, FCC, CE, BSMI |
Warranty | 5-year limited warranty up to 1,400 TBW |